Laminate  Engineered   Solid Oak
  1. Specifications
 
Species: Oak or Maple
Width:

125mm - 180mm - 82.6mm (4 7/8 inch - 7 1/16 inch - 3 1/4 inch)

Length: 400 to 1500 mm (average > 700mm) - 1900mm
Thickness: 12 mm - 15 mm (3mm straight-sawn top veneer) - 9mm(2mm straight-sawn top veneer)
Surface: Ribbed (Brushed) - Soft Wave (Handscraped) - Distressed - Flat - Even see characteristics
Lacquer: Durable PU-anti-scratch coating or German Treffert UV or UV-oil coatings
Glue: Formaldehyde Emission: (1mg/ltr) Result: E1
All these specifications are depending on the engineered collections. (also in inches)
Loadfactors: See Collections
   
  2. Collections
Top
 
  - Engineered Antique Oak Collection (PU coating)
     
  - Distressed Maple Collection (PU coating)
     
  - Contempary Collection (UV Treffert coating)
     
  - UV-OIL Treffert Collection (UV-Oil Treffert coating)
   
  - European Grand Plank Collection (UV-Oil Treffert or PU coating)
     
  - Budget Elegant Narrow Strips (UV Treffert- coating)
     
  - Promotional items depending on availability
 
     
  3. Product Introduction
Top
 
An Antique Oak floor will give any residential and commercial area, whether it be a finely designed home, office complex, hotel or retail store, the authentic luxurious and timeless character.

HAND CRAFTED
Our artisans use century's old techniques to create an old look and truly capture the natural beauty of hardwood floor. Selected from the finest raw materials, each plank is carefully hand crafted one board at a time to yield a magnificent and distinctive character only paralleled by timeless European floors of the Renaissance Area.
Our custom hand crafted textures result in a masterpiece which is as awe-inspiring to the eye as it is to feel underfoot. Each board speaks a different story and is a unique reflection of its maker.

READY TO WALK ON
Due to the fact that boards are pre-finished in the factory, your floor is "ready to walk on" immediately after installation, liberating you from all the trouble and dust which is associated with sanding and finishing on site.

ENGINEERED FLOORING

 

 


The Engineered flooring is a plywood-based hardwood construction in cross-ply configuration to ensure ultimate stability of the floor which will not splinter, wrap or crack. The top layer is a 3 mm Oak veneer. The thickness of the boards is 12 mm.
 
  4. Characteristics
Top

Surfaces
We offer 5 types of textures:
  • Ribbed ( brushed )
  • Soft Wave ( hand-scraped )
  • Distressed
  • Flat ( UV )
  • Even ( PU )

    Throughout the distressing process, our skilled artisans sculpt or scrape and brush along the natural flow of each grain and character mark to accentuate the true grace of the Antique floor.

Pre-Finished Boards

The Antique Oak floor comes in with the most durable polyurethane (PU) finish, which will protect your floor from scratches and won't change color over time.

We believe in our finish so strongly that we guarantee the PU finish for up to 15 years.

Beveled Edge

Each board has a deep beveled edge and end which creates a greater sense of identity and cohesion to open spaces.

  5. Packaging
Top
 
   The Antique Oak is packed in a standard box of 2.2 meter or 1.2meter, but white boxes can also be used.

   
 

   The container loading information and the other sizes of the box can be found HERE.

 
  6. Care & Maintenance
Top
 
15 YEARS LIMITED WEAR WARRANTY

The Antique Oak flooring is warranted against manufacturing defects and normal wear and will resist water damage from everyday spills and damp mopping when water is removed promptly.

The inevitable wear and tear of daily living ultimately destroys the splendor of hardwood floors. With the texture and character of an Antique Oak floor, wear only adds to the ambiance. Even the deepest scratches can be blended into the texture with minimal effort. The Antique Oak floor is not only livable but very easy to maintain with every day cleaning techniques. Just give your floor a quick sweep or if you are feeling ambitious, a once-over with a damp mop. For spot cleaning a ready to use "no wax floor cleaner" will do the job. To restore gloss levels, we recommend to using a floor refresher.

chinafloors Timber(shanghai) Co.Ltd-SDW productions 2006